Oil Forced Air Furnaces

Oneida Royal - Quality Furnaces Since 1822

LIMITED LIFETIME WARRANTY
1st-5th Year:
During the first 5 years (60 months) from the date of installation, all parts of the Oneida Royal oil fired furnaces are warranted with the exception of maintenance items which may need periodic replacement, i.e. air filters, nozzles, fan belts, fuses, pulleys and refractory chambers which are subject to mis-use and are replaceable under normal maintenance in the field. 5th Year & Beyond:
ONeida Royal warrants that the heat exchanger of its residential series furnace will be free from defects in material and workmanship for the lifetime of the original purchaser and a second subsequent owner. If the heat exchanger is found to be defective, Oneida Royal will repair or replace the heat exchanger under the conditions explained in the warranty.
Contact us if you have any questions.

LOB Series - Low Boy Oil-Fired Furnace - Front-Top/Rear Flue

LOW BOY OIL-FIRED FURNACE - FRONT-TOP/REAR FLUE
  1. Filter - Built-in rack and reusable filter for years of use.
  2. Belt Drive Blower - (Optional) The belt drive model offers cast iron pulleys for whisper quiet operation. Energy savings are realized due to the dual capacitor motor’s operation efficiency. Designed for years of trouble free service.
  3. Dual Clean Out Ports - Clean out ports are easily accessible through the vestibule and eliminate any possibility for soot entering the air side of the system.
  4. Multi-Speed Blower - The direct drive models offer 4 speeds and are designed to handle the airflow of today’s heating and cooling requirements. With the optional continuous operation setting and electronic air cleaner these models offer the comfort that homeowners expect.
  5. Fan Control Center - The same control is used for direct and belt drive models and is located in the vestibule for easy access and service. Wiring is color-coded, equipped with Molex connectors and comes ready for air conditioning, humidifier or air cleaner connection.
  6. Oil Burner - The retention head burner operates cleanly and quietly with factory supplied solenoid valve on the pump, 14,000 volt ignition, interrupted primary control and ball bearing PSC motors for years of reliable operation. Optional factory installed Riello oil burners are also available.

 

 

 

HOB Series - High Boy Multi-Position Oil-Fired Furnace

High Limit Temperature Switch – smartly located to eliminate potential overheating and premature heat exchanger fatigue.
Multi-position - (Direct Drive Only) Flexibility for an up-flow or horizontal installation. This design aids contractor familiarity and ease of installation.
Dual Clean Out Ports - Clean out ports are easily accessible through the vestibule and eliminate any possibility for soot entering the air side of the system.
Multi-Speed Blower - The direct driven models offer 4 speeds and are designed to handle the airflow of today’s heating and cooling requirements.
Belt Drive Blower - (Upflow Only) The belt drive model offers cast iron pulleys for whisper quiet operation. Energy savings are realized due to the dual capacitor motor’s operation efficiency.
Oil Burner - The retention head burner operates cleanly and quietly with factory supplied solenoid valve on the pump, 14,000 volt ignition, interrupted primary control and ball bearing PSC motors offer years of reliable operation. Optional factory installed Riello oil burners are also available.
Works in a Drawer Fan Control Center - Conveniently located in a slide out drawer, the same control is used for direct and belt drive models. A terminal strip is accessible without removing the drawer for easy hook-up. Wiring is colorcoded, equipped with Molex connectors and comes ready for air conditioning, humidifier or air cleaner connection.